Memory - HP Xw8200 - Workstation - 1 GB RAM Technical Reference Manual

3 Press in on the ribbed portion of the fan housing 2, rotate the fan housing down, and lift it out of the
chassis.
To replace a system fan, reverse the previous steps.
CAUTION When installing the system fan, be sure that the fan is situated so that the airflow direction is
going out of the chassis.

Memory

Memory Module Features
8 memory slots for DIMMS
256-MB, 512-MB, 1-GB and 2-GB pairs
16 GB maximum configuration (4 GB maximum on Windows and 16 GB maximum on Linux)
Supports single-channel or dual-channel DIMMs
Supports DDR2-400
No support for mirroring, no spare DIMM support
Standard ECC (72-bit ECC)
Enhanced ECC (x4 SDDC or 144-bit ECC) in dual-channel mode when all DIMMs are x4
DED retry
Memory Module Requirements
Use only industry-standard, registered, PC2-3200 DIMMs
Match DIMM pairs by size and type
No support for unbuffered memory
76 REMOVAL AND REPLACEMENT PROCEDURES
2
1