Linux-Enabled Workstations - HP Xw8200 - Workstation - 1 GB RAM Technical Reference Manual

8 Click Install next to "Additional CDs."
The HP Driver CD window opens.
9 Click Press to begin install...
10 When the install is done, you will have two options, "Reboot now..." on the left side and "Press to
continue, reboot later..." on the right side.
11 Click Reboot now...
Upgrading Device Drivers
If you must upgrade a Linux device driver, visit the HP website at
workstationsupport.

Linux-Enabled Workstations

Linux-enabled workstations are not preinstalled with Linux. They require the HP Installer Kit for Linux
and the purchase of a Red Hat box set. The Installer kit includes the HP CDs necessary to complete the
installation of all versions of the Red Hat box set that have been verified to work on HP workstation
hardware.
Verifying Hardware Compatibility
To see which Linux versions have been verified to work on HP workstation hardware:
Go to http://www.hp.com/support/workstation_manuals.
1
2 Select your HP workstation model.
3 Click the Hardware Support Matrix for Linux link.
Installing the Linux Operating System
To install the Linux operating system on your Linux-enabled system:
1 Follow the instructions for
2 Follow the instructions for
NOTE For more information concerning the setup of Linux-preinstalled or Linux-enabled workstations,
refer to the HP User Manual for Linux , which is located at
linux_user_manual.
For more information about HP and Linux, visit http://www.hp.com/linux.
Upgrading Device Drivers
If you must upgrade a Linux device driver, visit the HP website at
workstationsupport.
30 INSTALLING OR RESTORING THE OPERATING SYSTEM
"Restoring the Linux Operating System"
"Starting Up the Linux Operating System"
http://www.hp.com/go/
in the previous section.
in the previous section.
http://www.hp.com/support/
http://www.hp.com/go/