HP Xw8200 - Workstation - 1 GB RAM Technical Reference Manual page 36

5 To apply and save changes, select File>Save Changes and Exit.
If you have made changes that you do not want applied, select Ignore Changes and Exit.
To reset to factory settings, select Set Defaults and Exit. This option restores the original factory
system defaults.
CAUTION Do NOT turn the workstation power OFF while the ROM is saving your Computer Setup F10
changes because the CMOS could become corrupted. After you exit the F10 Setup screen, it is safe to
turn off all power to the workstation.
36 SYSTEM MANAGEMENT