Canon ImageRUNNER 2830 Facsimile Manual page 264

NOTE
•
Received documents that are stored in memory are displayed on the RX Job Status
screen. You can erase, forward, or check the details of the received documents from the
RX Job Status screen.
•
Even if the Memory Lock mode is set to 'Off', documents that are sent to Relay Memory
Box and Confidential Memory Box are stored in those memory boxes without being
printed.
•
You can enter up to seven digits for the password. If you enter fewer that seven digits, the
machine stores the password with leading zeros.
- Example: If <321> is entered, <0000321> is stored.
•
The default setting is 'Off'.
1
6
2
6-8
Communications Settings
(Additional Functions) ➞ [System Settings] ➞
Press
[Communications Settings].
If necessary, see the screen shots in steps 1 and 2 of "Send Start Speed," on
p. 6-3.
If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
Press [Memory Lock Settings].
(numeric keys) ➞ press
- (ID).