One-Touch Speed Dialing Settings - Canon ImageRUNNER 2830 Facsimile Manual

One-Touch Speed Dialing Settings

When you store a destination in a one-touch speed dialing key, you can also store
the send time, sending speed, long distance, subaddress and password, and ECM
TX settings.
■ Send Time
This mode enables you to set the time that you want a document to be sent.
■ Sending Speed
This mode enables you to set the transmission speed. The default setting is '33600 bps'. If
your document transmissions are slow in starting, this may mean that the telephone lines
in your area are in poor condition. Select a slower speed. You can select [33600 bps],
[14400 bps], [9600 bps], or [4800 bps].
■ Long Distance
This mode enables you to dial long distance numbers. Select [Long Distance (1)] if
5
transmission errors frequently occur when you make overseas calls (when the overseas
telephone number is registered in the Address Book). If errors persist, try selecting [Long
Distance (2)] or [Long Distance (3)].
■ Subaddress and Password
You can store a subaddress and a password in the one-touch speed dialing key to keep
transmissions confidential.
■ ECM TX
ECM (Error Correction Mode) reduces system and line errors when you are sending or
receiving documents from another machine with ECM capability.
NOTE
The default settings are:
- Send Time:
- Sending Speed:
- Long Distance:
- Subaddress, Password:
- ECM TX:
1
5-26
Storing Destinations
(Additional Functions) ➞ [Custom Fax Settings] ➞
Press
[Register Destinations].
If necessary, see the screen shots in steps 1 and 2 of "Storing One-Touch Speed
Dialing Keys," on p. 5-19.
None
33600 bps
Domestic
None
On