Setting The Pin Code Position - Canon ImageRUNNER 2830 Facsimile Manual

Hide thumbs Also See for ImageRUNNER 2830:
Table of Contents

Advertisement

6

Setting the PIN Code Position

Follow this procedure to set the PIN code position.
NOTE
You can only set the PIN code position if PIN Code Access is set to 'Option'. (See
"Setting PIN Code Access," on p. 3-35.)
3
1
2
3-38
Using a PIN Code
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Place your originals.
NOTE
For instructions on placing your originals, see "Placing Originals," on p. 1-34.
Begin entering the fax number using
press [PIN Code] once in the desired position ➞ continue
entering the rest of the fax number.
<C> is displayed on the screen after you press [PIN Code].
NOTE
The PIN code position depends on the PBX system.
[PIN Code] can be pressed either before the destination, after the destination, or
between the numbers of the destination.
For security, PIN codes are not displayed while dialing (only <C> appears), and
they do not appear in printed activity reports.
(numeric keys) ➞
-

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imagerunner 3530Imagerunner 2230

Table of Contents