Canon ImageRUNNER 2830 Facsimile Manual page 241

7
If you want to set a password for this Relay Memory Box, enter
the password using
If you do not want to set a password, press [Next] proceed to step 8.
You cannot store a password with only zeros as the number, such as <0000000>.
IMPORTANT
Since there is no way to check a stored password, make sure that you write it
down, and keep it in a safe place.
NOTE
•
If you make a mistake when entering the password, press
entire entry ➞ enter the correct password.
•
If you want to cancel setting up the Relay Memory Box, press [Cancel].
(numeric keys) ➞ press [Next].
-
Setting Up Memory Boxes
(Clear) to clear the
5-75
5