Redialing - Canon ImageRUNNER 2830 Facsimile Manual

3

Redialing

2
Redialing enables you to specify the last destination that was dialed using the
numeric keys. This mode is useful if you are sending several documents to the
same destination.
IMPORTANT
If Restrict New Addresses in System Settings (from the Additional Functions screen) is
set to 'On' when the machine is in the System Management mode, you cannot use the
Automatic Redial mode.
NOTE
•
If you specify more than one destination using the numeric keys, you can only redial the
last destination specified.
•
You cannot redial a destination that you specified using One-Touch Speed Dialing or
Coded Speed Dialing.
•
You cannot redial a destination that you specified after pressing [On-hook].
1
2-18
Dialing Methods
Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press
is complete, press [Done].
Scanning starts, and the document is sent to the specified destination.
Place your originals.
NOTE
For instructions on placing your originals, see "Placing Originals," on p. 1-34.
(Start) once for each original. When scanning