Canon ImageRUNNER 2830 Facsimile Manual page 285

3
Press [On].
If you do not want to set PIN code access, press [Off] ➞ [OK] ➞ proceed to
step 5.
4
Select the desired type of PIN code ➞ press [OK].
Details of each item are shown below.
[Option]: Select if your PBX requires a PIN code depending on the destination.
If PIN Code Access is set to 'Option', [PIN Code] appears on the Fax
Basic Features screen.
[Prefix]: Select if your PBX always requires you to enter a PIN code before the
destination.
[Suffix]: Select if your PBX always requires you to enter a PIN code after the
destination.
The selected mode is set.
Communications Settings
6
6-29