4
5
3
3-4
Delaying a Send Job
Press [OK] ➞ [Done].
The display returns to the Fax Basic Features screen.
Specify the destination ➞ press
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press
is complete, press [Done].
Scanning starts.
The document is stored in memory, and then sent to the specified destination at
the specified time.
NOTE
•
For instructions on specifying the destination, see "Dialing Methods," on p. 2-16.
To cancel a delayed send job, press [Special Features] ➞ [Delayed TX] ➞ [Cancel].
•
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).
•
You can also cancel a delayed send job from the System Monitor screen. (See
"Using the System Monitor Screen," on p. 1-43.)
(Start).
(Start) once for each original. When scanning