Canon ImageRUNNER 2830 Facsimile Manual page 245

11
Select each relay setting.
● If you want to restrict the relay source machine from sending you a
transmission request:
❑
Press [On] for <Original Unit Restriction>.
❑
Specify the destination ➞ press [OK].
If you do not want to set a restriction, press [Off].
You can also specify the relay destination using
If the desired destination is not displayed, press [▼] or [▲] to scroll to the
desired destination.
NOTE
•
For instructions on specifying a destination, see "Dialing Methods," on p. 2-16.
To erase a specified destination, select the desired destination from the list ➞ press
•
[Erase].
- (numeric keys).
Setting Up Memory Boxes
5
5-79