Mass Storage Devices; Removing The Flexible Disk Drive - HP Tc2110 - Server - 128 MB RAM Maintenance Manual

Hp server tc2110 operation and maintenance guide (online version 1.1 - english)
Hide thumbs Also See for Tc2110 - Server - 128 MB RAM:
Table of Contents

Advertisement

Chapter 7

Mass Storage Devices

Removing the Flexible Disk Drive

1. If the Server is operating, power down the Server, and if necessary, backup mass storage devices.
Refer to Chapter 1, "Controls and Indicators" for instructions.
2. Disconnect the power cord and any external cables connected to the Server.
If necessary, label each one to expedite re-assembly.
3. Remove the left side cover.
4. Remove the upper bezel.
5. At the rear of the flexible disk drive (FDD), carefully disconnect the power and data cables.
6. Remove the flexible disk drive:
a. Press in on both release tabs to release the FDD assembly.
b. Pull the FDD assembly out of the chassis.
c. Remove the two screws from the side of the FDD assembly.
74
Figure 7-1. Mass Storage Device Locations
Replacing Parts

Advertisement

Table of Contents
loading

Table of Contents