Replacing The Upper Bezel - HP Tc2110 - Server - 128 MB RAM Maintenance Manual

Chapter 3

Replacing the Upper Bezel

1. Hold the upper bezel next to the chassis, and align the hinge teeth, both upper and lower, as shown in
the following illustration.
The hinge teeth can only fit together within the space allowed, so it should fit on the first try.
2. Close the upper bezel, swinging it to the left, where it will engage the release tabs.
3. Push the upper bezel closed so it engages the release tabs.
The release tabs should snap into place.
18
Figure 3-3. Removing the Upper Front Bezel
Installing and Configuring