HP Tc2110 - Server - 128 MB RAM Maintenance Manual page 58

Chapter 4
A message indicates that the configuration has been cleared.
7. Power down the Server and disconnect the power cord.
8. Remove the left side cover.
9. Set the CMOS/Password switch to the OFF position to retain the configuration.
10. Replace the left side cover and reconnect the power cord and all data cables.
11. Power up the server.
12. Run the Setup program by pressing F2.
13. Press F9.
The CMOS default values are automatically downloaded and saved.
14. Press Esc to save the configuration and exit from the Setup program.
52
Figure 4-1. Location of Configuration Switches
Figure 4-2. Configuration Switch Positions
Diagnostics