Replacing The Upper Front Bezel - HP Tc2100 - Server - 128 MB RAM Installation Manual

Chapter 3
Release Tabs (2)
Figure 3-3. Removing Upper Front Bezel
4. Place the upper front bezel in a safe place for re-installation later.

Replacing the Upper Front Bezel

The Upper Front Bezel uses hinge teeth instead of a normal hinge assembly to
engage both sides and pivots on these when opening or closing the front bezel.
1. Hold the front bezel next to the chassis, and align the hinge teeth, both upper
and lower, as shown in Figure 3-4.
The hinge teeth can only fit together within the space allowed, so it should fit
in the opening on the first try.
2. Close the front bezel, swinging it to the left, where it will engage the release
tabs.
3. Push the upper front bezel closed so it engages the release tabs.
The release tabs should snap into place.
20
Opening and Closing the HP Server