Power Supply Specifications; Power Consumption And Heat Dissipation - HP FM064UT#ABA Maintenance And Service Manual

Power supply specifications

Table 1-6
Power supply
Operating voltage range
Rated voltage range
Rated line frequency
Operating line frequency range
Rated input current
Heat dissipation
(Configuration and software dependent)
Power supply fan
FEMP Standby Power compliant @115V
(<2W in S5 – Power Off)
ERP Lot 6 Compliant @230V (<1w in S5 –
Power Off)
Built-in Self Test LED
Surge tolerant full ranging power supply
(withstands power surges up to 2000V)
Power Consumption in sleep mode (as
defined by ENERGY STAR) - Suspend to
RAM (S3) (Instantly Available PC)

Power consumption and heat dissipation

Power consumption and heat dissipation specifications are available for multiple configurations. To
review available specifications, see http://www.hp.com/go/quickspecs.
To reach zero power consumption, unplug the workstation from the power outlet or use a power strip
with an on/off switch. For additional information about power-saving features, see the operating system
installation instructions.
This product is in compliance with U.S. Executive Order 13221.
10 Chapter 1 Product overview
Power supply specifications
Item Description
475W Wide Ranging, Active PFC
and 85% efficient
90 – 269 VAC
100–240 VAC 118 VAC
50–60 Hz 400 Hz
47–66 Hz 393–407 Hz
10A @ 100-127 VAC 10A @ 118
VAC
6A @ 200–240 VAC
Typical 954 Btu/hr = (240.3 kg-cal/hr)
Maximum 1977 Btu/hr = (498.2 kg-cal/
hr)
One fan, 92mm x 25mm, variable speed
Yes
Yes
Yes
Yes
<6 watts
ENWW