Battery; Removing The Battery - HP FM064UT#ABA Maintenance And Service Manual

User manual
Hide thumbs Also See for FM064UT#ABA:
Table of Contents

Advertisement

Battery

This section describes how to remove and install the battery.
The battery that comes with the workstation provides power to the real-time clock and has a minimum
lifetime of about three years.
WARNING!
the battery is handled improperly. Do not disassemble, crush, puncture, short external contacts, dispose
in water or fire, or expose it to temperatures higher than 60°C (140°F).
CAUTION:
battery is removed. To back up the CMOS settings, select the Save to Diskette option in the
Computer Setup (F10) Utility.
NOTE:
Do not dispose of batteries, battery packs, and accumulators with general household waste.

Removing the battery

To remove the battery:
1.
Power down the workstation (see
2.
Disconnect power from the workstation (see
3.
Remove the side access panel (see
4.
On the system board, press the release tab of the battery holder.
ENWW
This workstation includes a lithium battery. There is a risk of fire and chemical burn if
Before removing the battery, back up the CMOS settings in case they are lost when the
Predisassembly procedures on page
Predisassembly procedures on page
Removing the side access panel on page
Removing and installing components
74).
74).
77).
127

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z400

Table of Contents