Table of Contents
Advertisement
Saving and printing information in HP Vision Diagnostics
You can save the information displayed in the HP Vision Diagnostics Survey, History and Errors tabs to
a diskette or a USB flash drive. You can not save to the hard drive. The system will automatically create
an html file that has the same appearance as the information displayed on the screen.
1.
Insert a diskette or USB flash drive if running HP Vision Diagnostics from CD.
2.
Click Save in the bottom on any of the Survey, History or Errors tabs. All three log files will be
saved regardless of from which tab the Save button was clicked.
3.
Select the drive onto which you will save the log files and click the Save button. Three html files
will be saved to the inserted diskette or USB flash drive.
NOTE:
files have been written to the media.
4.
Print the desired information from the storage device used to save it.
NOTE:
screen. Be sure to remove the USB flash drive or CD from the optical drive.
Diagnostic codes and errors
This section presents information about diagnostic LED codes, LED color definitions, and POST error
messages to help you troubleshoot problems.
Diagnostic LED and audible (beep) codes
This section describes the front and rear panel LED error and operation codes as well as the audible
codes that might occur before or during the POST.
NOTE:
Some workstation models do not have Built-In Self Test (BIST) LED functionality.
194
Chapter 6 Diagnostics and troubleshooting
Do not remove the diskette or USB key until you see a message indicating that the html
To exit HP Vision Diagnostics, click the Exit Diagnostics button at the bottom of the
ENWW
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
