9.
Remove the rear system fan from the LCS radiator fan holder by lifting the fan holder tabs (1), and
then rotating the fan out of the holder (2), as shown in the following figure. (Release the tabs when
the fan is removed.)
Figure 5-66
10.
Reinstall the rear system fan (see
11.
Reinstall the CPU heatsink (see
12.
Reinstall all removed components and reconnect any cables that have been disconnected.
140
Chapter 5 Replacing components
Removing the rear system fan from the radiator fan holder
Installing the rear system fan assembly on page
Installing the CPU heatsink on page
99).
154).
ENWW