Operate The Producer Iii Autoloader; Power On The Producer Iii Autoloader - Rimage Producer 7100 User Manual

Operate the Producer III Autoloader

This section provides the information that you need to produce CDs or DVDs with the Producer III autoloader.

Power On the Producer III Autoloader

Before you begin:
The carousel must be installed before you power on the system. For more information about installing the carousel,
refer to Installing the carousel on page 11.
1. Press the power switch on the rear of the autoloader.
The Producer III autoloader power is on.
If you have a Producer IIIN autoloader, continue with
step 2.
2. On the front of the autoloader, press the PC power
button to power on the embedded PC. The Producer
IIIN autoloader and embedded PC power are on.
2000538_B
Operate the Producer III Autoloader
Power Switch
PC Power Button
9