Set Encryption; Set Oa Gateway; Set Oa Name - HP BL480c - ProLiant - 4 GB RAM User Manual

SET ENCRYPTION

•
Command:
SET ENCRYPTION { NORMAL | STRONG }
•
Description:
Using STRONG encryption enforces use of only FIPS 140-2 approved algorithms including AES,
3DES, and SHA. Setting this option to NORMAL also enables other SSLv3 algorithms such as RSA,
RC4, and MD5.
•
Access level/Bay level:
OA administrator
•
Restrictions:
None

SET OA GATEWAY

•
Command:
SET OA GATEWAY [<bay number>] <ip address>
•
Description:
Sets the network default gateway.
o
This command is used if the system is configured to use a static IP address.
o
If you do not specify a bay number, the command defaults to the active Onboard Administrator.
o
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions:
The <ip address> must be in the form ###.###.###.###, where each ### ranges from 0 to 255.

SET OA NAME

•
Command:
SET OA NAME [<bay number>] "<OA name>"
•
Description:
Sets the Onboard Administrator name. If a bay number is not specified, the command defaults to the
active Onboard Administrator.
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions:
The Onboard Administrator name is 1 to 32 characters long including all alphanumeric characters
and the dash (-).
Enclosure network configuration commands 93