Show Oa Status - HP BL480c - ProLiant - 4 GB RAM User Manual

•
Description:
Displays the network configuration for the specified Onboard Administrator. If you do not specify the
Onboard Administrator, then the command defaults to the active Onboard Administrator.
•
Access level/Bay level:
All
•
Restrictions:
VLAN ID information appears only when VLAN is enabled.
Example
OA-0018FE27577F> show oa network
show oa network
Onboard Administrator #1 Network Information:
Name: OA-0018FE27577F
- - - - - IPv4 Information - - - - -
DHCP: Enabled - Dynamic DNS
IPv4 Address: 16.84.189.190
Netmask: 255.255.252.0
Gateway Address:
- - - - - IPv6 Information - - - - -
IPv6: Enabled
Link-local Address: fe80::218:feff:fe27:577f/64
Static Address [1]: 2001::10/64
DHCPv6: Disabled
Router Advertisement: Disabled
- - - - - General Information - - - - -
Primary
Secondary
Tertiary
VLAN ID: 1
MAC Address: 00:18:FE:27:57:7F
Link Settings: Auto-Negotiation, 100 Mbit, Full Duplex
Link Status: Active
Enclosure IP Mode: Not Supported

SHOW OA STATUS

•
Command:
SHOW OA STATUS [ALL | <bay number> [{ , | - } <bay number>]]
•
Description:
Displays health status for the Onboard Administrator. If you do not specify the Onboard
Administrator, the command defaults to the Active Onboard Administrator.
•
Access level/Bay level:
All
•
Restrictions:
None
Example
OA-0018FE27577F> SHOW OA STATUS
Onboard Administrator #1 Status:
Name: OA-0018FE27577F
Role: Active
16.84.188.1
DNS: 16.110.135.51
DNS: 16.110.135.52
DNS: Not Set
Enclosure management commands 118