Set Snmp Community; Set Snmp Location; Show Encryption - HP BL480c - ProLiant - 4 GB RAM User Manual

SET SNMP COMMUNITY

•
Command:
SET SNMP COMMUNITY {READ | WRITE} "<community name>"
•
Description:
Sets the community name for the read or write SNMP community. If a blank write community name is
given, then SNMP set commands are disabled until a non-empty community name is given.
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions:
The write <community name> must be no more than 20 characters long, and the read
o
<community name> must be 1 to 20 characters long.
All printable characters are valid.
o
The default read community name is public.
o
The default write community name is public.
o

SET SNMP LOCATION

•
Command:
SET SNMP LOCATION "<location>"
•
Description:
Configures the SNMP location of the enclosure. The default location is blank.
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions:
The <location> must be no more than 20 characters long. Valid characters are all alphanumeric, the
underscore (_), the dash (-), and spaces.

SHOW ENCRYPTION

•
Command:
SHOW ENCRYPTION
•
Description:
Displays the ENCRYPTION setting.
•
Access level/Bay level:
OA administrator, OA user
•
Restrictions:
In STRONG mode, only FIPS 140-2 approved algorithms including AES, 3DES, and SHA are
permitted.
Enclosure network configuration commands 96