Set Vlan Ipconfig Dhcp; Set Vlan Ipconfig Save; Set Vlan Ipconfig Static - HP BL480c - ProLiant - 4 GB RAM User Manual
Onboard administrator command line interface user guide
Hide thumbs
Also See for BL480c - ProLiant - 4 GB RAM:
- Manual (43 pages) ,
- Datasheet (397 pages) ,
- Reference manual (138 pages)
Table of Contents
Advertisement
OA administrator, OA operator
•
Restrictions:
None
SET VLAN IPCONFIG DHCP
•
Command:
SET VLAN IPCONFIG DHCP [<OA bay number>] <OA VLAN ID>
•
Description:
Temporarily sets the OA to DHCP mode and the specified VLAN ID (0 to 4094). Setting the VLAN ID
number to 0 disables enclosure VLAN. Any other setting enables enclosure VLAN.
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions:
VLAN ID must be an integer between 0 and 4094.
SET VLAN IPCONFIG SAVE
•
Command:
SET VLAN IPCONFIG SAVE
•
Description:
Saves the VLAN IPCONFIG changes to FLASH.
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions:
None
SET VLAN IPCONFIG STATIC
•
Command:
SET VLAN IPCONFIG STATIC [<OA bay number>] <ip address> <netmask>
[<gateway>] <OA VLAN ID>
•
Description:
Temporarily sets the OA to static IP mode and the specified VLAN ID (0 to 4094). Setting the VLAN
ID number to 0 disables enclosure VLAN. Any other setting enables the enclosure VLAN.
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions:
VLAN ID must be an integer between 0 and 4094.
VLAN commands 159
Advertisement
Table of Contents
