HP BL480c - ProLiant - 4 GB RAM User Manual page 166

Event
Enclosure Name Change
Fan Status Change
Fan Inserted
Fan Removed
Interconnect Inserted
Interconnect Thermal Status
Changed
Interconnect Removed
Interconnect Power Reset
Interconnect Port Map Info
LDAP Group Removed
OA System Log Cleared
OA Name Changed
OA Inserted
OA Removed
OA Takeover
Power Supply Status
Change
Power Supply Inserted
Power Supply Removed
Power Supply Redundancy
Change
Power Supply Overload
Restart Event
Rack Name Change
Rack Topology
Thermal Status Change
Cause
The name of the enclosure was changed.
The status of a fan has changed.
A fan has been inserted.
A fan has been removed.
An interconnect module was inserted into the
enclosure.
The thermal status of an interconnect module
changed.
An interconnect module was removed from
the enclosure.
The power of an interconnect module was
reset.
The port mapping information of an
interconnect module was updated.
A LDAP group was removed from the
Onboard Administrator. If you are logged
into the Onboard Administrator under this
LDAP group, you are disconnected.
The Onboard Administrator system log was
cleared.
The Onboard Administrator DNS name was
changed.
A redundant Onboard Administrator was
inserted into the enclosure.
The redundant Onboard Administrator was
removed from the enclosure.
The redundant and active Onboard
Administrators are switching roles. The Active
Onboard Administrator reboots into Standby
Mode and the redundant Onboard
Administrator transitions to Active Mode.
The status of a power supply has changed.
A power supply has been inserted.
A power supply has been removed.
The power supplies are either now redundant
or are no longer redundant.
The power supplies are being asked to draw
more current than they are able.
The Onboard Administrator is about to start.
The rack name stored on the enclosure was
changed.
Enclosures were connected or disconnected
from the enclosure link.
A thermal sensor has changed state.
Event notifications 166