Enclosure network configuration commands
ADD OA ADDRESS IPV6
•
Command:
ADD OA ADDRESS IPV6 {<bay number>} <ipv6 address/prefix length>
•
Description:
Adds an IPv6 static address for the Onboard Administrator. If IPv6 is enabled, this setting takes
effect immediately. If no Onboard Administrator number is provided, the command defaults to the
active Onboard Administrator.
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions:
The prefix length is mandatory.
o
The <ip address> must be in the form ####:####:####:####:####:####:####:####/###,
o
where each #### ranges from 0 to FFFF and the prefix /### ranges from 0 to 128.
ADD OA DNS
•
Command:
ADD OA DNS [<bay number>] <ip address>
•
Description:
Adds an IP address of a DNS server to the list. DNS servers are used if the system is configured to
use a static IP address.
If a bay number is not specified, the command defaults to the active Onboard Administrator.
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions:
A maximum of two DNS servers can be added.
The <ip address> must be in the form ###.###.###.###, where each ### ranges from 0 to 255.
ADD OA DNS IPV6
•
Command:
ADD OA DNS IPV6 {<bay number>} <ipv6 address{/prefix length}>
•
Description:
Adds an IPv6 address to the list of DNS servers. If a bay number is not specified, then the command
defaults to the active Onboard Administrator. The network prefix length is optional.
Enclosure network configuration commands 79