UID:
Off
Status: OK
SHOW OA USB
•
Command:
SHOW OA USB
•
Description:
Displays which USB controller is currently enabled.
o
The FRONT controller enables the internal DVD drive and the front USB connector.
o
The BACK controller enables the two USB ports on the near KVM Option Module.
o
This command has no effect on HP c3000 OA boards that are hardware revision level C0 and
o
later. Hardware revision is found using the SHOW OA INFO command.
•
Access level/Bay level:
OA Administrator
•
Restrictions:
None
Example
OA-0018FE27577F> SHOW OA USB
Onboard Administrator USB setting = FRONT
SHOW POWER
•
Command:
SHOW POWER
•
Description:
Displays the current power configuration
•
Access level/Bay level:
All
•
Restrictions:
None
Example
OA-0018FE27577F> SHOW POWER
Power Mode: Not Redundant
Dynamic Power: Enabled
Set Power Limit: Not Set
Power Capacity:
Power Available:
Power Allocated:
Present Power:
Power Limit:
3600 Watts DC
2685 Watts DC
915 Watts DC
476 Watts AC
4378 Watts AC
Enclosure management commands 119