HP SIM commands
ADD HPSIM CERTIFICATE
•
Command:
ADD HPSIM CERTIFICATE <end marker> <certificate> <end marker>
•
Description:
Adds an HP SIM certificate on the command line.
Start with a string that does not appear within the certificate (the end marker).
1.
Paste in the certificate.
2.
Terminate the command with the end marker.
3.
•
Access level/Bay level:
OA administrator
•
Restrictions:
This command is only available in script mode.
o
The certificate text cannot exceed 3071 characters.
o
DOWNLOAD HPSIM CERTIFICATE
•
Command:
DOWNLOAD HPSIM CERTIFICATE { <host> }
•
Description:
Downloads an HP SIM certificate from the specified IP address or fully-qualified DNS system name,
such as HP-SIM system. The <host> value can be an IPv4 address, an IPv6 address, or a DNS name.
•
Access level/Bay level:
OA administrator
•
Restrictions:
The <IP address> must be in the form ###.###.###.###, where each ### ranges from 0 to
o
255.
For IPv6 the <ip address> must be in the form ####:####:####:####:####:####:####:####
o
where each #### ranges from 0 to FFFF.
IPv6 addresses must be informed without the network prefix length.
o
REMOVE HPSIM CERTIFICATE
•
Command:
REMOVE HPSIM CERTIFICATE "<certificate name>"
HP SIM commands 40