16
17
18
3
The installation of the USB class driver and the printer driver is completed.
For Windows 2000
Installing from CD-ROM Setup
1
2
3-16
Installing the CAPT Software
Click [Finish].
Copying files is started.
When the dialog box for completing installation appears, click
[OK].
Click [Finish].
Make sure that the printer is turned OFF and the computer
and printer are not connected with a USB cable.
IMPORTANT
•
Connect the USB cable at the appropriate point (Step 11 on p. 3-19) during the
installation, and then turn the power ON.
•
If a Wizard appears by the Plug and Play automatic setup, click [Cancel], and then
install the CAPT software using this procedure.
Turn the power of the computer on and start up Windows
2000.