Trouble Shooting Map - Canon LASER SHOT LBP3210 User Manual

Trouble Shooting Map

If any problem occurs while you are using the printer, follow the flow chart shown
below to check the problem.
The printer driver
fails to print.
No
Printing is
impossible.
6
An error message
appears on the Printer
Status Window.
Print quality
deteriorates.
Paper Problems
See "Paper Problems," on
p. 6-22.
6-2

Trouble Shooting Map

Yes
Follow the messages
displayed on the Printer Status
Window to remedy an error.
See "Printer Status Window,"
on p. 4-51.
Toner density is set to light.
See "Specifying the Print
Quality," on p. 4-40.
Toner runs low.
See "Replacing the Toner
Cartridge," on p. 5-2.
The printer is installed in an
adverse environment.
See the Getting Started Guide.
Other Problems
See "Print Quality Problems,"
on p. 6-19.
The printer driver cannot be
installed properly.
See "Installation Problems," on p. 6-24.
The power cord is not connected.
The power switch is turned OFF.
See "Turning the Printer ON/OFF," on
p. 1-10.
The printer is not connected to your
computer.
See "Connecting to a Computer," on
p.1-12.
The printer driver is not installed
properly.
See "Installation Problems," on p. 6-24.