Installing From Cd-Rom Setup - Canon LASER SHOT LBP3210 User Manual

IMPORTANT
•
If you are using Windows 2000/XP/Server 2003, be sure to log on as a user who is a
member of Administrators when starting up.
•
If you are using Windows XP Service Pack 2 or another operating system equipped with
Windows Firewall on the client side, configure the following settings. If you do not setup
the following settings on the client side, the printer status may not display properly in the
Printer Status Window and you may not be able to access some of the printer functions.
1. Select [Control Panel] from the [Start] menu, then click [Network and Internet
2. On the [Exceptions] sheet in the [Windows Firewall] dialog box, place a
3
NOTE
•
Clients can use both Windows 98/Me and Windows 2000/XP/Server 2003.
•
If your print server is Windows 98/Me, you cannot download and install the printer driver
on Windows 2000/XP/Server 2003.

Installing from CD-ROM Setup

1
3-50 Printing from a Network Computer by Sharing the Printer on a Network
Connections] then [Windows Firewall].
checkmark next to [File and Printer Sharing], and click the [OK] button.
Insert the supplied "LBP3210 User Software" CD-ROM into
the CD-ROM drive.
If the CD-ROM is already set in the drive, take it out and insert it into the drive again.
CD-ROM Setup appears automatically.
IMPORTANT
If CD-ROM Setup does not appear automatically, select [Run] from the [Start]
menu, enter "D:\English\CNAB2MNU.exe", and then click [OK]. (The CD-ROM
drive name is indicated as "D:" in this manual. The CD-ROM drive name may differ
depending on the computer being used.)