Paper Problems - Canon LASER SHOT LBP3210 User Manual

Paper Problems

Paper comes out wrinkled.
Cause 1
Remedy
Cause 2
Remedy
Cause 3
6
Remedy
Paper curls.
Cause 1
Remedy
Cause 2
Remedy
White dust is attached to the printed transparencies.
Cause
Remedy
6-22

Paper Problems

Paper is not loaded in the paper cassette properly.
Load the paper in the paper cassette properly. (See "Printing on Plain Paper/
Heavy Paper/Label/Transparency," on p. 2-15; "Printing Envelopes," on p. 2-29;
"Printing on Custom (Nonstandard) Paper Size," on p. 2-43)
Paper is loaded in the multi-purpose tray at an angle.
Load the paper in the multi-purpose tray straight. (See "Printing on Plain Paper/
Heavy Paper/Label/Transparency," on p. 2-15; "Printing Envelopes," on p. 2-29;
"Printing on Custom (Nonstandard) Paper Size," on p. 2-43)
Paper is damp.
Replace paper with paper from a new stack.
Paper is inappropriate.
Replace the paper with a type that can be used with this printer. (See "Paper
Requirements," on p. 2-2)
The Paper Type setting does not match the loaded paper.
When using plain paper, select [Plain Paper L] for [Paper Type] in the printer
driver.
Specify [Paper Type] in the [Paper Source] sheet.
The transparencies were printed just after another type of paper was printed
continuously.
If you print continuously on another type of paper before printing on
transparencies, the transparencies may come out with chipped paper attached.
In this case, wipe and remove the chipped paper with a soft cloth.