Output Size - Canon LASER SHOT LBP3210 User Manual

I Output Size
Display the [Output Size] pull-down menu, then select the desired paper size.
The output sizes that can be selected are as follows:
•
Match Page Size
•
Standard paper sizes (Sizes from A4 to A5; from Legal to Executive)
•
Envelopes (Envelope C5, Envelope COM10, Envelope DL, Envelope Monarch)
•
Custom Paper Size (See p. 4-36)
NOTE
•
When printing on paper that is of the same size as [Page Size], select [Match Page Size].
•
If you select a paper size that differs from [Page Size], the print will be automatically
reduced or enlarged to fit on the page.
•
When printing data in which multiple paper sizes are specified in the application, you can
print at the same size as you specified in [Output Size] in the printer driver.
•
If you can specify the page size, print copies, and orientation in your application, you do
not have to specify the settings in the [Page Setup] sheet.
I Copies
Allows you to specify the number of copies to be printed.
Click the arrows for [Copies] or enter a number from the keypad. You can specify from 1 to
999 print copies.
I Orientation
Allows you to select either portrait orientation or landscape orientation.
Click either [Portrait] or [Landscape] for [Orientation].
I Page Layout (See p. 4-31)
•
N Pages per Sheet
Multiple pages can be printed on one sheet of paper.
The number of pages that can be selected is 1, 2, 4, 8, 9, or 16 (Pages per Sheet).
If you select 2, 4, 8, 9, or 16 (Pages per Sheet), the [Page Order] pull-down menu will
appear, allowing you to specify the page order.
•
Poster
Magnifies a single page image and prints it out on several sheets of paper.
The number of pages that can be selected is 2 x 2, 3 x 3, or 4 x 4.
I Manual Scaling/Page Order (See p. 4-33)
When [1 Page per Sheet] is selected for [Page Layout], [Manual Scaling] appears. When
2, 4, 8, 9, or 16 (Pages per Sheet) is selected for [Page Layout], [Page Order] appears.
•
Manual Scaling: The scaling is adjusted automatically when the values in [Page Size]
and [Output Size] are different. If you want to specify the scale factor manually, select
[Manual Scaling], then specify the value in the spin box. You can specify from 25 to 200
%.
Using the Printing Functions
4
4-19