Installation On The Clients - Canon LASER SHOT LBP3210 User Manual

- If you clicked [No], however, Windows Firewall was configured to block communication
with the client computers, and you will need to use the following method to clear that
block.
1. Select [Control Panel] from the [Start] menu, then click [Network and Internet
Connections] © [Windows Firewall].
2. On the [Exceptions] sheet in the [Windows Firewall] dialog box, place a checkmark
next to [Canon LBP3210 RPC Server Process], and click the [OK] button.
•
If you installed the CAPT software by any method other than CD-ROM Setup, you need
to use the utility software to configure Windows Firewall to unblock communication with
the client computers. (See p. 7-8)

Installation on the Clients

This section describes the procedure for installing the printer driver on the client
computers.
There are two ways to install the printer driver: local installation and download
installation.
The screen shots used in this section are from Windows 2000.
I Local Installation (See p. 3-50)
Installing the printer driver using the supplied CD-ROM.
I Download Installation
Installing the printer driver without using the supplied CD-ROM, but by downloading the
printer driver from the print server. There are the following two ways of download
installation:
•
Installing from [Add Printer Wizard] (See p. 3-55)
•
Installing from [Windows Explorer] (See p. 3-57)
Printing from a Network Computer by Sharing the Printer on a Network
3
3-49