Cleaning The Printer - Canon LASER SHOT LBP3210 User Manual

Cleaning the Printer

After you have used the printer for a long period of time, or when you find dust or
dirt on the outer surfaces of the printer, clean the printer. When cleaning the printer,
be careful of the following points in order to prevent an electrical shock or printer
malfunctions.
WARNING
•
When cleaning the printer, turn OFF the main power switch, then unplug the
power plug. Failure to observe these steps may result in a fire or electrical
shock.
•
Do not use alcohol, benzene, paint thinner, or other flammable substances. If
flammable substances come into contact with a high-voltage area inside the
printer, this may result in a fire or electrical shock.
5
IMPORTANT
•
Be careful not to use a cleaning agent other than water or a mild detergent diluted with
water, as this may deform or crack the plastic materials in the printer.
•
When using a mild detergent, be sure to dilute it with water.
•
Grease or oil does not have to be applied to this printer. Be sure not to apply grease or
oil.
1
5-16

Cleaning the Printer

Press " " of the power switch to turn the printer OFF
disconnect the USB cable
the AC power outlet
b
, then unplug the power plug from
b
.
c
c
a
,
a