On The Computer - Canon LASER SHOT LBP3210 User Manual

1
Connect the B-type (square) end of the USB cable to the USB
connector on the rear side of the printer.
2
Connect the A-type (flat) end of the USB cable to the USB port

on the computer.

NOTE
•
If a Wizard appears after connecting the USB cable by the Plug and Play automatic
setup, install the software for this printer using the following procedure. For more
details, see "Installing the CAPT Software," on p. 3-4.
- Click [Cancel] and install the software from CD-ROM Setup.
- Install using Plug and Play.
•
If you are not sure about the USB cable that is supported by your computer, contact
your local authorized Canon dealer.
Connecting to a Computer
1
1-13