Removing The Microprocessor 2 Air Baffle - IBM x3650 - System M2 - 7947 User Manual

Removing the microprocessor 2 air baffle

When you work with some optional devices, you must first remove the
microprocessor 2 air baffle to access certain components. The following illustration
shows how to remove the microprocessor 2 air baffle.
To remove the microprocessor 2 air baffle, complete the following steps:
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and peripheral devices and disconnect all power cords and
3. Remove the cover (see "Removing the cover" on page 43).
4. Remove PCI riser-card assembly 2 (see "Removing a PCI riser-card assembly"
5. Grasp the top of the air baffle and lift the air baffle out of the server.
46
System x3650 M2 Type 7947: Installation and User's Guide
on page 36.
external cables (see "Turning off the server" on page 21).
on page 44).
Attention: For proper cooling and airflow, replace all air baffles before you
turn on the server. Operating the server with any air baffle removed might
damage server components.