Resetsp Command; Update Command - Lenovo RD220 - ThinkServer - 3798 User Manual

resetsp command

Description
Use the resetsp command to restart the IMM or IMM. You must have at least
Advanced Adapter Configuration authority to be able to issue this command.

update command

Syntax
update -i TFTP_server_IP_address -l filename
Description
Use the update command to update the firmware on the IMM or IMM. To use this
command, you must have at least Advanced Adapter Configuration authority. The
firmware file (specified by filename) is first transferred from the TFTP server
(specified by its IP address) to the IMM or IMM and then flashed. The -v option
specifies verbose mode.
Note: Make sure that the TFTP server is running on the server from which the file
will be downloaded.
Option
-i
-l
-v
Description
TFTP server IP address
File name (to be flashed)
Verbose mode
Chapter 7. Command-line interface
93