Remote Presence - Lenovo RD220 - ThinkServer - 3798 User Manual

To perform server power and restart actions, complete the following steps.
Note: Select the following options only in case of an emergency, or if you are
1. Log in to the IMM. For more information, see Chapter 2, "Opening and using
2. In the navigation pane, click Power/Restart. Scroll down to the Server
3. Click one of the following options:
Power on server immediately
Power on server at specified time
Power off server immediately
Shut down OS and then power off server
Shut down OS and then restart server
Restart the server immediately
Schedule Daily/Weekly Power and Restart Actions
A confirmation message is displayed if you select any of these options, and you
can cancel the operation if it was selected accidentally.

Remote presence

Notes:
1. The IMM remote presence function is available only in IMM Premium.
2. The remote control feature available only through the IMM Web interface. You
You can use the remote presence function, or remote control feature in the IMM
Web interface, to view and interact with the server console. You can also assign to
the server a CD or DVD drive, diskette drive, USB flash drive, or disk image that
is on your computer.
The remote control feature provides the following functions:
v Remotely viewing video with graphics resolutions up to 1280 x 1024 at 75 Hz,
v Remotely accessing the server, using the keyboard and mouse from a remote
v Mapping the CD or DVD drive, diskette drive, and USB flash drive on a remote
58
Integrated Management Module: User Guide
offsite and the server is nonresponsive.
the IMM Web interface," on page 9.
Power/Restart Control area.
Turn on the server and start the operating system.
Turn on the server at a specified time and start the operating system.
Turn off the server without shutting down the operating system.
Shut down the operating system and then turn off the server.
Restart the operating system.
Turn off and then turn on the server immediately without first shutting
down the operating system.
Shut down the operating system, turn off the server at a specified daily or
weekly time (with or without restarting the server), and turn on the server
at a specified daily or weekly time.
must log in to the IMM with a user ID that has Supervisor access to use any of
the remote control features.
regardless of the server state
client
client, and mapping ISO and diskette image files as virtual drives that are
available for use by the server