Restoring Defaults; Restarting Imm - Lenovo RD220 - ThinkServer - 3798 User Manual

10. To log in to the IMM again, start the browser, and follow your regular login

Restoring defaults

Use the Restore Defaults link to restore the default configuration of the IMM, if
you have Supervisor access.
Attention: When you click Restore Defaults, you will lose all the modifications
that you made to the IMM.
To restore the IMM defaults, complete the following steps:
1. Log in to the IMM. For more information, see Chapter 2, "Opening and using
2. In the navigation pane, click Restore Defaults to restore default settings of the
3. Log in again to use the IMM Web interface.
4. Reconfigure the network interface to restore connectivity. For information about

Restarting IMM

Use the Restart IMM link to restart the IMM. You can perform this function only if
you have Supervisor access. Any Ethernet connections are temporarily dropped.
You must log in again to use the IMM Web interface.
To restart the IMM, complete the following steps:
1. Log in to the IMM. For more information, see Chapter 2, "Opening and using
2. In the navigation pane, click Restart IMM to restart the IMM. Your TCP/IP or
3. Log in again to use the IMM Web interface.
Note: When you click Restore or Modify and Restore, an alert window might
open if the configuration file that you are attempting to restore was
created by a different type of service processor or was created by the
same type of service processor with older firmware (and therefore, with
less functionality). This alert message includes a list of
systems-management functions that you must configure after the
restoration is complete. Some functions require configurations on more
than one window.
6. To continue restoring this file to the IMM, click Restore Configuration. A
progress indicator is displayed as the firmware on the IMM is updated. A
confirmation window opens to verify whether the update was successful.
Note: The security settings on the Security page are not restored by the
restore operation. To modify security settings, see "Secure Web server
and secure LDAP" on page 39.
7. After you receive a confirmation that the restore process is complete, in the
navigation pane, click Restart IMM; then, click Restart.
8. Click OK to confirm that you want to restart the IMM.
9. Click OK to close the current browser window.
process.
the IMM Web interface," on page 9.
IMM. If this is a local server, your TCP/IP connection will be broken, and you
must reconfigure the network interface to restore connectivity.
the network interface, see "Configuring network interfaces" on page 28.
the IMM Web interface," on page 9.
modem connections are broken.
Chapter 3. Configuring the IMM
47