Remote Control Screen Capture; Remote Control Video Viewer View Modes - Lenovo RD220 - ThinkServer - 3798 User Manual

To remotely access a server console, complete the following steps:
1. Log in to the IMM. For more information, see Chapter 2, "Opening and using
2. In the navigation pane, click Remote Control.
3. To control the server remotely, use one of the links at the bottom of the Remote
Close both the Video Viewer window and the Virtual Media Session window when
you are finished using the Remote Control feature.
Notes:
1. Do not close the Virtual Media Session window if a remote disk is currently
2. If you have mouse or keyboard problems when you use Remote Control, see
3. If you use the remote console to change settings for the IMM in the Setup

Remote control screen capture

The screen capture feature in the Video Viewer window captures the video display
contents of the server. To capture and save a screen image, complete the following
steps:
1. In the Video Viewer window, click File.
2. Select Capture to File from the menu.
3. When you are prompted, name the image file and save it to the location that

Remote control Video Viewer view modes

To change the view of the Video Viewer window, click View. The following menu
options are available:
Refresh
Full Screen
60
Integrated Management Module: User Guide
the IMM Web interface," on page 9.
Control page. If you want exclusive remote access during your session, click
Start Remote Control in Single User Mode. If you want to allow other users
remote console (KVM) access during your session, click Start Remote Control
in Multi-user Mode. New windows open that provide access to the Remote
Disk and Remote Console functionality.
If the Encrypt disk and KVM data during transmission check box was
selected before the Remote Control window was opened, the disk data is
encrypted with 3DES encryption.
mapped. See "Remote disk" on page 64 for instructions about closing and
unmapping a remote disk.
the help that is available from the Remote Control page in the Web interface.
Utility program, the server might restart the IMM and you lose the remote
console and the login session. After a short delay, you can log in to the IMM
again with a new session, start the remote console again, and exit the Setup
Utility program.
you choose on the local client.
Note: Screen capture images are saved as JPG or JPEG file types.
The Video Viewer redraws the video display with the video data from the
server.
The Video Viewer fills the client desktop with the video display. This
option is available only when the Video Viewer is not in full screen mode.