Server Power And Restart Control Commands; Power Command; Reset Command; Serial Redirect Command - Lenovo RD220 - ThinkServer - 3798 User Manual

Example
system> vpd dsa
Type
----
dsa
system>

Server power and restart control commands

The server power and restart commands are as follows:
v power
v reset

power command

Syntax
power on
power off [-s]
power state
power cycle [-s]
Description
Use the power command to control the server power. To issue the power
commands, you must have power and restart access authority.

reset command

Syntax
reset [option]
option:
-s
Description
Use the reset command to restart the server. To use this command, you must have
power and restart access authority. The -s option shuts down the operating system
before the server is restarted.

Serial redirect command

There is one serial redirect command: console.

console command

Syntax
console 1
Version ReleaseDate
------- -----------
D6YT19AUS 02/27/2009
power on turns on the server power.
power off turns off the server power. The -s option shuts down the operating
system before the server is turned off.
power state displays the server power state (on or off) and the current state of
the server.
power cycle turns off the server power and then turns on the power. The -s
option shuts down the operating system before the server is turned off.
Chapter 7. Command-line interface
81