Ntp Command - Lenovo RD220 - ThinkServer - 3798 User Manual

Option Description
-l Login permission
attribute
-m Domain source
-n Service name
-p Client password
-pc Confirm client
password
-r Root entry
distinguished name
(DN)
s1ip Server 1 host name/IP
address
s2ip Server 2 host name/IP
address
s3ip Server 3 host name/IP
address
s1pn Server 1 port number
s2pn Server 2 port number
s3pn Server 3 port number
-u UID search attribute
-v Get LDAP server
address through DNS
-w Allows wildcards in
the group name
-h Displays the command
usage and options

ntp command

Syntax
ntp [options]
options:
-en state
-i hostname
-f frequency
-synch
Description
Use the ntp command to display and configure the Network Time Protocol (NTP).
Values
String of up to 63 characters for string
Extract search domain from login ID, use only
configured search domain, try login first then
configured value
String of up to 15 characters for service_name
String of up to 15 characters for client_pw
String of up to 15 characters for confirm_pw
Command usage is: ldap -p client_pw -pc confirm_pw
This option is required when you change the client
password. It compares the confirm_pw argument with
the client_pw argument, and the command will fail if
they do not match.
String of up to 63 characters for root_dn
String of up to 63 characters or an IP address for host
name/ip_addr
String of up to 63 characters or an IP address for host
name/ip_addr
String of up to 63 characters or an IP address for host
name/ip_addr
A numeric port number of up to 5 digits for
port_number.
A numeric port number of up to 5 digits for
port_number.
A numeric port number of up to 5 digits for
port_number.
String of up to 23 characters for search_attrib
Off, on
Off, on
Chapter 7. Command-line interface
85