Logging In To The Imm - Lenovo RD220 - ThinkServer - 3798 User Manual

8. Select Save Network Settings.
9. Exit from the Setup Utility.
Notes:
1. You must wait approximately 1 minute for changes to take effect before the
2. You can also configure the IMM network connection through the IMM Web

Logging in to the IMM

Important: The IMM is set initially with a user name of USERID and password of
To access the IMM through the IMM Web interface, complete the following steps:
1. Open a Web browser. In the address or URL field, type the IP address or host
2. Type your user name and password in the IMM Login window. If you are
3. On the Welcome Web page, select a timeout value from the drop-down list in
4. Click Continue to start the session.
10
Integrated Management Module: User Guide
Notes:
a. If you choose to use a static IP address, you must specify the IP address, the
subnet mask, and the default gateway.
b. You can also use the Setup Utility to select a dedicated or shared IMM
network connection. On the Network Configuration screen, select
Dedicated or Shared in the Network Interface Port field.
c. To find the locations of the Ethernet connectors on your server that are used
by the IMM, see the documentation that came with your server.
server firmware is functional again.
interface. For more information, see "Configuring network interfaces" on page
28.
PASSW0RD (with a zero, not the letter O). This default user setting has
Supervisor access. Change this default password during your initial
configuration for enhanced security.
name of the IMM server to which you want to connect.
using the IMM for the first time, you can obtain your user name and password
from your system administrator. All login attempts are documented in the
event log. Depending on how your system administrator configured the user
ID, you might need to enter a new password.
the field that is provided. If your browser is inactive for that number of
minutes, the IMM logs you off the Web interface.
Note: Depending on how your system administrator configured the global
login settings, the timeout value might be a fixed value.
The browser opens the System Status page, which gives you a quick view of
the server status and the server health summary.
For descriptions of the actions that you can perform from the links in the left
navigation pane of the IMM Web interface, see "IMM action descriptions" on
page 11. Then, go to Chapter 3, "Configuring the IMM," on page 15.