Lenovo RD220 - ThinkServer - 3798 User Manual page 27

Note: If you have not configured a profile, it does not appear in the Login
Profiles table.
The Login Profiles page displays each login ID, the login access level, and the
password expiration information.
Important: By default, the IMM is configured with one login profile that
enables remote access using a login user ID of USERID and a
password of PASSW0RD (the 0 is a zero, not the letter O). To avoid a
potential security exposure, change this default login profile during
the initial setup of the IMM.
3. Click Add User. An individual profile is displayed.
4. In the Login ID field, type the name of the profile.
You can type a maximum of 16 characters in the Login ID field. Valid
characters are uppercase and lowercase letters, numbers, periods, and
underscores.
Note: This login ID is used to grant remote access to the IMM.
5. In the Password field, assign a password to the login ID.
A password must contain a minimum of five characters, one of which must be
a nonalphabetic character. Null or empty passwords are accepted.
Note: This password is used with the login ID to grant remote access to the
IMM.
6. In the Confirm password field, type the password again.
7. In the Authority Level area, select one of the following options to set the access
rights for this login ID:
Supervisor
The user has no restrictions.
Read Only
The user has read-only access only and cannot perform actions such as
file transfers, power and restart actions, or remote presence functions.
Custom
If you select the Custom option, you must select one or more of the
following custom authority levels:
v User Account Management: A user can add, modify, or delete users
and change the global login settings in the Login Profiles page.
v Remote Console Access: A user can access the remote console.
v Remote Console and Virtual Media Access: A user can access both
the remote console and the virtual media feature.
v Remote Server Power/Restart Access: A user can access the
power-on and restart functions for the remote server. These functions
are available in the Power/Restart page.
v Ability to Clear Event Logs: A user can clear the event logs.
Everyone can look at the event logs, but this particular permission is
required to clear the logs.
v Adapter Configuration - Basic: A user can modify configuration
parameters in the System Settings and Alerts pages.
v Adapter Configuration - Networking & Security: A user can modify
configuration parameters in the Security, Network Protocols,
Network Interface, Port Assignments, and Serial Port pages.
Chapter 3. Configuring the IMM
21