Configuration Commands; Dhcpinfo Command - Lenovo RD220 - ThinkServer - 3798 User Manual

Description
Use the console command to start a serial redirect console session to the
designated serial port of the IMM.

Configuration commands

The configuration commands are as follows:
v dhcpinfo
v ifconfig
v ldap
v ntp
v passwordcfg
v portcfg
v slp
v srcfg
v ssl
v tcpcmdmode
v timeouts
v usbeth
v users

dhcpinfo command

Syntax
dhcpinfo eth0
Description
Use the dhcpinfo command to view the DHCP server-assigned IP configuration for
eth0, if the interface is configured automatically by a DHCP server. You can use the
ifconfig command to enable or disable DHCP.
Example
system> dhcpinfo eth0
-server 192.168.70.29
-n IMMA00096B9E003A
-i 192.168.70.202
-g 192.168.70.29
-s 255.255.255.0
-d linux-sp.raleigh.lenovo.com
-dns1 192.168.70.29
-dns2 0.0.0.0
-dns3 0.0.0.0
system>
The following table describes the output from the example.
82
Integrated Management Module: User Guide
Option
-server
-n
-i
-g
-s
Description
DHCP server that assigned the configuration
Assigned host name
Assigned IP address
Assigned gateway address
Assigned subnet mask