Table of Contents
Advertisement
ULTRA2 LVD SCSI HOST ADAPTER
2. Once a Windows 98 session is established, start from the desktop and use your
installed mouse or the appropriate keystrokes to select these items one after
the other (each item contains the next in sequence): "My Computer,"
"Control Panel," "System," "Device Manager" tab, "Other Devices" category,
"PCI-SCSI Bus Controller" subcategory.
3. In the "PCI SCSI Bus Controller Properties" window, select the "Driver" tab,
then select "Change/Update Driver," then click "Next."
4. Select "Search." Check the "Specify a Location" box, type in "A:\WIN95," then
click "Next."
5. When the "Install from Disk" window appears, insert Driver Disk 1 into
drive A:, then enter the pathname of the Windows 98 driver's directory
("A:\WIN95"), then select "OK".
6. The words "Initio INI-A100U2W PCI SCSI Controller" will appear in the
"Install from Disk" window. Click "Next" to install the driver.
7. After the driver has been installed, click on "Finish."
8. This completes installing the Adapter's device driver. Reboot the system to
activate the driver.
9. We highly recommend that you verify that your Windows 98 device driver has
been properly installed by starting at the desktop and selecting these items
one after the other (each item contains the next in sequence): "My
Computer," "Control Panel," "System," "Device Manager" tab, "SCSI
Controllers" category, "Initio INI-A100U2W PCI SCSI Controller." If "This
device is working properly" is displayed under "Device Status," the driver has
been correctly installed.
52
Advertisement
Table of Contents
