Table of Contents
Advertisement
ULTRA2 LVD SCSI HOST ADAPTER
Apps Server
with Adapter
installed
4.6 The Setup Utility
4.6.1 T
B
O
HE
OOT
Among the Ultra2 LVD SCSI Host Adapter's built-in firmware programs is a menu-
driven SCSI Setup Utility, with which you can change the Adapter's settings without
opening the computer or handling the Adapter's circuit board. (Note that the
Adapter's default settings are appropriate for most PCI systems, so odds are you
won't need to run the Utility.) To start the Utility, first make sure that all of the
devices attached to the SCSI bus are powered up when the host computer system is
turned ON. Then reboot the PC the Adapter is installed in and wait for this
prompt to appear (it will be preceded by version and copyright info):
!!! Press < Ctrl > < I > for SmartSCSI Setup Utility !!!
!!! Press < Ctrl > < B > to boot from SCSI CD-ROM !!!
!!! Press < ESC > to continue !!!
30
LANs for client access and
cluster communication
Shared
I/O Bus
Figure 4-6. Simple multiple-initiator system.
, S
C
PTIONS
ELECT
HANNEL
Shared
CD-ROMS
Shared
I/O Bus
M
,
M
ENU
AND
AIN
Database Server
with Adapter
installed
M
ENU
Advertisement
Table of Contents
