Table of Contents
Advertisement
5.2.3 U
PDATING THE
Take these steps to update the driver if you have an older version of it installed in
your Windows 95 or 95a system:
1. Once a Windows 95 session is established, start from the desktop and use your
installed mouse or the appropriate keystrokes to select these items one after
the other (each item contains the next in sequence): "My Computer,"
"Control Panel," "System," "Device Manager" tab, "SCSI Controllers" category,
"Initio INI-A100U2W PCI SCSI Controller."
2. In the "IN-A100U2W SCSI Controller Properties" window, select the "Driver"
tab, then select "Change Driver...".
3. In the "Select Device" window, select "Have Disk...".
4. When the "Install from Disk" window is displayed, insert Driver Disk 1 into
drive A:, then enter the pathname of the Windows 95 driver's directory
("A:\WIN95") and select "OK".
5. Select "Initio INI-9XXX Host Adapter", then select "OK", then "OK" again to
install the INIA100.MPD driver on your hard disk drive. (Because of a
Windows quirk, the A:\WIN95 directory might become deselected; it might be
necessary to direct Windows back to A:\WIN95—possibly several times—
before it actually copies the driver.)
6. This completes updating the Ultra2 LVD SCSI Host Adapter's device driver.
Reboot the system to activate the updated driver.
7. We highly recommend that you verify that the new version of the device
driver has been properly installed by starting at the desktop and selecting
these items one after the other (each item contains the next in sequence):
"My Computer," "Control Panel," "System," "Device Manager" tab, "SCSI
Controllers" category, "Initio INI-A100U2W PCI SCSI Controller." If "This
device is working properly" is displayed on your screen, the driver has been
correctly installed.
W
95 D
INDOWS
RIVER IN
CHAPTER 5: Driver Installation
W
95/95
IDOWS
A
47
Advertisement
Table of Contents
