Table of Contents
Advertisement
ULTRA2 LVD SCSI HOST ADAPTER
/X: or /x:—Use this option to exclude particular CD-ROM drives from having their
I/O handled by INICD.SYS. Excluded CD-ROM drives are identified by specifying
the host adapter, target ID, and LUN (logical unit number). These values are
separated by a colon. Groups of CD-ROM drives can also be identified. Examples
of the different ways CD-ROM drives can be excluded:
• /X0:1:2
This will exclude the drive on SCSI Host Adapter 0 (that is, the
• /X0:2
This will exclude the drives on SCSI Host Adapter 0 whose target
• /X0
This will exclude all of the drives on SCSI Host Adapter 0.
When DOSSETUP installs INICD.SYS, it will add command lines like those shown
below to your CONFIG.SYS and AUTOEXEC.BAT files. (These examples assume
that the Adapter drivers have been installed in the "C:\INIASPI" directory. The
device name must be exactly the same in both the CONFIG.SYS and
AUTOEXEC.BAT entries.)
CONFIG.SYS:
DEVICEHIGH=C:\INIASPI\ASPIA100.SYS
DEVICEHIGH=C:\INIASPI\INICD.SYS /D:INICD001
The first line loads the ASPI Manager and the second line loads the CD-ROM driver,
specifying the device name "INICD001" for the CD-ROM drive.
AUTOEXEC.BAT:
C :\INIASPI\MSCDEX /D:INICD001
This line loads the Microsoft supplied MSCDEX.EXE driver, instructing it to attach to the
CD-ROM drive "INICD001." SETUP copies MSCDEX to the INIASPI directory during
installation.
40
Adapter on the PCI bus that the motherboard has designated
number zero) whose target ID is 1 and whose LUN is 2.
ID is 2, no matter what LUN they have.
Advertisement
Table of Contents
